WINBOX 3.29 HOW TO
WINBOX 3.29 UPDATE

If you unplug it and plug it into ether5, it will grab an IP address in the 192.168.5.xyz range. For example:Īfter you do this for all 3 new DHCP servers (not counting the one that was already set up on ether2), your DHCP Server / Networks screen should look like this:Īt this point, if you plug your laptop into ether3, it will grab an IP address in the 192.168.3.xyz range. Next you have to set up your DHCP Networks, so that each DHCP Client will receive the correct DHCP information like what its Gateway and DNS servers are. In other words…ĭo this for each port and your DHCP Server screen should look something like this: Name the new server whatever you like, set the Interface to the port you want to have use this server, and set the Address Pool you want this Server to draw from. Go to IP / DHCP Server / DHCP and click the +. You have to set up new DHCP Servers to use them. 3 subnet you may want something like 192.168.3.50-192.168.3.100.ĭo this for each port and your Pool screen should look something like this (I have a VPN pool set up as well, and my default-dhcp was already set up and I didn’t want to change it just for these screenshots):Īt this point those IP Pools aren’t being used by anything. Then enter the Addresses as the DHCP range you want to use for that port – so for the. 2 subnet, or whatever you find easy to remember). Name the Pool whatever you want (like pool1 for the. You’ll want to do this first so that when you’re setting up the new DHCP Server you can just select the new IP Pool from the drop-down instead of having to close it, go back and create the new Pool, then go back to creating the new DHCP server. First set up the additional IP Pools you’re going to use for each server. It’s the same concept as changing the default DHCP range, but you’re just adding additional DHCP servers and IP Pools for your network to use. Next is to set up a DHCP server for each port. When all 4 subnets are set up, your Address List screen should look similar to this (ether3, 4, and 5 are in italics because there is nothing plugged into them): To set up the 192.168.3.xyz subnet on ether3, it would look like this: Wireless Network Security Wireless LAN Security Click Cisco Client theVPN +, type in the Address you want to give the port, type in the Network you want to assign to the port, and select the port from the VPN Solutions Interface drop-down menu. Setting Up A Wireless Network To give each port its own IP address, go into IP, then Addresses. Now, for a port to run its own network, it needs a few things: IP Address DHCP Server ?

When you’ve set up ether3-5 to have no Master Port, none of the ports should show an “S” in the left column. To admin at: 1B7jJzVkjHVCbSMYjxoLF JaWqDeciqCQ7h Change the Master Port on ether3, 4, and 5 like this (and change the You could call it “Port 3″ or “Fred” or “I have my NAS plugged in here.” It doesn’t really matter to the functionality of the router… Don’t get confused by the port names when you start making changes.

WINBOX 3.29 UPDATE

If you change ether3 from a Slave to a Master, the name will not update on its own. It’s important to note that the “Name” of the interface will not change based on your settings. If we want ether3-5 to run separate networks, we need to set them to have NO Master Port.

WINBOX 3.29 HOW TO

How to request a new article or update to an old one Left column showing which ports are “slaves”: The ports are even “name” as such, and there is an “S” in the

In Mikrotik terms, ether3, 4, and 5 have their Master Port set to ether2. Settings and DHCP server, then ether3, 4, and 5 are all “slaves” ofĮther2. These 4 ports all work together is because ether2 has all of the LAN Master Port Popular Articles Out of the box, the 750 is set up for ether1 to be the WAN port and ether2, ether3, ether4, and ether5 to be your LAN port. Let’s take an RB750GL and have it run 4 internal networks instead of These things is beyond the scope of this post, but this will show you

 / Mikrotik / How to run multiple networks from a Mikrotik  January 27, 2013ĥ Port Router? Since a Mikrotik (example being a 750GL) is a true 5 port router and not just a consumer-grade router (which is actually a router with 4 port switch), you can set them up to run multiple networks, use multiple ISPs for WAN failover, and more.  How to run multiple networks from a Mikrotik Have a question? Ask or enter a search term. How to set up multiple networks on a Mikrotik router | Networking For Integrators

Winbox 3.29